Janazzo Services

In Pursuit Of Excellence
      Phone: 800-297-3931
      Phone: 860- 621- 7381
      Service: 860- 621- 8974
      Fax: 860- 621- 7529


Commercial Service



Janazzo Services Corporation has been offering premium service agreements for Commercial Customers for over (50) years and would like to have you as a customer.


    We Offer:
  • Competitive rates
  • 10% Discounts on parts and labor
  • Customized service agreements personalized for your account.
  • (84) Eighty-four point checklist on your Air Conditioning & Heating system .
  • Detailed Log Sheet (not just check marks) on each piece of equipment confirming you are getting the quality inspection you deserve.
  • Filters, Belts, Lubricants & Biodegradable coil cleaning chemicals included in service agreement.(No Extra Charge)
  • Equipment History individually tracked on our computer database
  • (24) Twenty-four hour (7) seven-day emergency service.
    We Offer:
  • Customized Design/Build installation of HVAC systems.
  • Complete in-house fiberglass/metal ductwork fabrication.
  • Over (50) Years of experience in Industrial/Commercial, Health Care Facilities, Schools, Office and Retail Applications.


CHECK US OUT AND SEE WHAT JANAZZO SERVICES CORPORATION CAN OFFER YOU.

 
 





PLAN A, P, X
(Standard Gas Furnace)

(Pulse & Condensing Type)
(Complete Heat)

  • Check automatic controls
  • Clean burners as needed
  • Check and clean heat exchanger as needed
  • Inspect for combustion leaks
  • Test flue for satisfactory operation
  • Check for proper fuel consumption
  • Check manifold gas pressure
  • Check temperature rise per manufacturer's specification
  • Check CO2, O2,and test for Carbon Monoxide
  • Adjust combustion for optimum efficiency
  • Lubricate moving parts as needed
  • Test safety and operating controls
  • Lubricate motors and bearings as required
  • Check belt wear, tension and alignment (if applicable)
  • Inspect air blower wheel
  • Replace disposable air filters
  • Check flame signal readings
  • Check thermostat operation
  • Record detailed information on log sheet




PLAN AH
(Air Handler)
  • Check fins and clean coil
  • Check electrical connections for tightness
  • Check blower belt wear,tension and alignment
  • Inspect air blower wheel
  • Lubricate motors and moving parts as required
  • Check voltage and amperage readings
  • Replace disposable air filters
  • Check thermostat operation
  • Record detailed information on log sheet




Plan AP
(Air Purifier)
  • Check power to unit
  • Check electrical connections
  • Check airflow switch
  • Check voltage readings
  • Annual maintenance kit (filter, metal insert and UV lights)
  • Record detailed information on log sheet




Plan B
(Oil Furnace)
  • Clean and adjust electrodes
  • Clean and inspect burner tube,burner blower wheel,
    cad cell,fuel pump strainer, and primary air band
  • Replace fuel oil nozzle and fuel oil filter cartridge
  • Lubricate burner motor, inspect combustion chamber
    operating controls, safety controls, and breaching
  • Clean fuel passageways(heat exchanger section) and breaching
  • Inspect blower for proper operation
  • Check belt wear, tension and alignment (if applicable)
  • Lubricate blower motor and bearings as required
  • Replace disposable air filters
  • Check draft over fire and breaching
  • Check CO2, O2, Smoke and Carbon Monoxide
  • Adjust System for optimum efficiency
  • Check temperature rise per manufacturer's specification
  • Check thermostat operation
  • Record detailed information on log sheets




Plan C
(Air Conditioner)
  • Check fins and clean condensor coil
  • Check electrical connections for tightness
  • Visually check for oil and refrigerant leaks
  • Check blower belt wear, tension and alignment (if applicable)
  • Replace disposable air filters
  • Check and clean condensate drain
  • Inspect air blower wheel
  • Lubricate motors and moving parts as required
  • Check refrigerant operation pressures
  • Check sub-cooling and superheat readings
  • Check temperature drop across evaporator coil
  • Check voltage and amperage readings
  • Check thermostat operation
  • Record detailed information on log sheet




Plan D
(Heat Pump)
  • Lubricate motors and moving parts as needed
  • Check defrost cycle and reversing valve operation
  • Inspect air blower wheel
  • Check blower belt wear, tension and alignment
  • Visually check for oil and refrigerant leaks
  • Check electrical controls and crankcase heater
  • Replace disposable air filters
  • Check and clean condensate drain
  • Check and tighten electrical connections
  • Check voltage and and amperage readings
  • Check operating pressures and temperatures
  • Check auxillary heat for proper operation
  • Check temperature across air handler
  • Check Thermostat operation
  • Record detailed information on log sheet




Plan E
(Electric Furnace)
  • Check operation of controls
  • Check all wiring for loose connections and condition of insulation
  • Check voltage supply and amperage readings
  • Lubricate blower motor and moving parts as required
  • Inspect blower wheel
  • Check belt wear, tension and alignment (if applicable)
  • Replace disposable air filters
  • Check blower operation and staging of heating elements
  • Check thermostat operation
  • Record detailed information on log sheet




Plan EAC
(Electric Air Cleaner)
  • Check power to unit
  • Check electrical connections
  • Check airflow switch
  • Check voltage readings
  • Remove and clean electronic cells and pre-filters
  • Record detailed information on log sheet




Plan G
(Gas Boiler)
  • Check automatic controls
  • Clean burners as needed
  • Check and clean heat exchanger as needed
  • Inspect for combustion leaks
  • Test flue for satisfactory operation
  • Lubricate moving parts as required
  • Check for proper fuel consumption
  • Check manifold gas pressure
  • Check CO2, O2, Smoke and Carbon Monoxide
  • Adjust combustion for optimum efficiency
  • Test safety and operation controls
  • Check voltage and amperage readings
  • Check flame signal readings
  • Chek thermostat operation
  • Check circulator and zone valve operation
  • Record detailed information on log sheet




Plan GEN
(Generator)
  • Check automatic controls
  • Check electrical connections for tightness
  • Replace spark plugs
  • Replace crankcase oil
  • Replace oil filter
  • Lubricate moving parts as needed
  • Check and clean battery leads
  • Check operation of battery charger
  • Replace air filter
  • Check voltage and amperage readings
  • Check manifold pressure readings and input
  • Check operating and safety controls
  • Visually check for leaks
  • Record detailed information on log sheet




Plan HUM
(Humidifier)
  • Clean drain pan (replace if disposable type)
  • Clean and adjust float assembly
  • Remove and replace pad
  • Check motor operation (if applicable)
  • Check heating elements (if applicable)
  • Check operating and safety controls
  • Check drain (if applicable)
  • Check voltage and amperage readings
  • Check humidistat setting and operation
  • Record detailed information on log sheet




Plan HWE
(Electric Hot Water Heater)
  • Check condition of insulation on wiring
  • Check electrical connections for tightness
  • Check voltage and amperage readings
  • Check operation of heating elements
  • Check operating and safety controls
  • Record detailed information on log sheet




Plan HWG
(Gas Hot Water Heater)
  • Check automatic controls
  • Clean burners as needed
  • Check and clean heat exchangers as needed
  • Inspect for combustion leaks
  • Test flue for satisfactory operation
  • Lubricate moving parts as required
  • Check for proper fuel consumption
  • Check manifold gas pressure
  • Check CO2,O2, and test for Carbon Monoxide
  • Adjust combustion for optimum efficiency
  • Test safety and operating controls
  • Check voltage and amperage readings
  • Check flame signal readings
  • Check thermostat operation
  • Record detailed information on log sheet




Plan HWO
(Oil Water Heater)
  • Clean and adjust electrodes,burner blower wheel,
    cad cell,fuel pump strainer, and primary air band
  • Replace fuel oil nozzle and fuel oil filter cartridge
  • Lubricate burner motor, inspect combustion chamber, operating
    controls and safety controls
  • Clean flue passageways and breaching
  • Check draft over fire and breaching
  • Check CO2,O2, Smoke and Carbon Monoxide
  • Adjust system for optimum efficiency
  • Lubricate motors and moving parts as required
  • Check circulator if applicable
  • Check voltage and amperage readings
  • Check thermostat operation
  • Record detailed information on log sheet




Plan O
(Oil Boiler)
  • Clean and adjust electrodes, burner blower wheel,
    cad cell,fuel pump strainer, and primary air band
  • Replace fuel oil nozzle and fuel oil filter cartridge
  • Lubricate burner motor, inspect combustion chamber, operating
    controls and safety controls
  • Clean flue passageways (boiler sections and breaching)
  • Inspect and lubricate circulator, drain expansion tank as necessary
  • Check draft over fire and breaching
  • Check CO2,O2, Smoke and Carbon Monoxide
  • Adjust system for optimum efficiency
  • Lubricate motors and moving parts as required
  • Check circulator and zone valve operation
  • Check voltage and amperage readings
  • Check thermostat operation
  • Record detailed information on log sheet
X